DH 1500 WITH CARBIDE DISC

Dontalia informs you:

Strong, robust and easy-to-use model trimmer for grinding hard or soft plaster models. Includes a special resin grinding disc and water-fed disc cleaning system.

Advantages:
- Non-slip rubber grips for stability when facing.
- Silent operation as its special resin wheel is carefully balanced.
- Larger working surface (12cm) because there is no external shaft and nut obstructing the grinding area.
- Tilting working surface, with three operating positions.

Description:
- The drainage system is mounted to the side and has been designed to prevent clogging, thanks to the extra large drain hole (30mm), while water flush with plaster particles is driven out under the centrifugal force generated by the wheel.
- Water flow is regulated using a built-in valve situated directly on the cutter itself.
- Solenoid valve (electronic water feed system activated by pressing the switch). The switch is protected by a PVC insulating cover.
- Single-phase 1/2 HP motor.
- Motor fitted with guards, giving a more compact and finished appearance.
- Robust, weighs over 21kg.
- Made entirely of aluminium and stainless steel with an epoxy paint finish.

Technical data:
Voltage: 230V
Power: 500W
Motor: Single-phase
Speed: 1500rpm
Capacitor: 12?F, 450V
Dimensions: 31cm (width), 34.5cm (height), 45cm (depth)
Plate-mounted wheel: Ø 25.4cm
Weight: 21kg

Accessories:
H92689 Replacement carbide disc.
H92691 Replacement diamond disc.

Strong, robust and easy-to-use model trimmer for grinding hard or soft plaster models. Includes a special resin grinding disc and water-fed disc cleaning system.

Advantages:
- Non-slip rubber grips for stability when facing.
- Silent operation as its special resin wheel is carefully balanced.
- Larger working surface (12cm) because there is no external shaft and nut obstructing the grinding area.
- Tilting working surface, with three operating positions.

Description:
- The drainage system is mounted to the side and has been designed to prevent clogging, thanks to the extra large drain hole (30mm), while water flush with plaster particles is driven out under the centrifugal force generated by the wheel.
- Water flow is regulated using a built-in valve situated directly on the cutter itself.
- Solenoid valve (electronic water feed system activated by pressing the switch). The switch is protected by a PVC insulating cover.
- Single-phase 1/2 HP motor.
- Motor fitted with guards, giving a more compact and finished appearance.
- Robust, weighs over 21kg.
- Made entirely of aluminium and stainless steel with an epoxy paint finish.

Technical data:
Voltage: 230V
Power: 500W
Motor: Single-phase
Speed: 1500rpm
Capacitor: 12?F, 450V
Dimensions: 31cm (width), 34.5cm (height), 45cm (depth)
Plate-mounted wheel: Ø 25.4cm
Weight: 21kg

Accessories:
H92689 Replacement carbide disc.
H92691 Replacement diamond disc.